High Tide Free Stock Images

Include:

Gears on Tide Predicting Machine No. 2

These gears pass some the energy provided by the operator turning a crank to the rear section of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. These gears pass some the energy provided by the operator turning a crank to the rear section of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Beautiful reflections of chains during spring tide at river Moskva

Seashore at sunset

Tide coming in on the seashore at sunset with golden light and high fluffy clouds.

Botany Bay Tide

High Tide Rushing towards shore at Botany Bay Beach on Edisto Island. A Skeleton tree sits isoliated in the ocean as a reminder of where land once occupied the area. High Tide Rushing towards shore at Botany Bay Beach on Edisto Island. A Skeleton tree sits isoliated in the ocean as a reminder of where land once occupied the area.

Tide Predicting Machine No. 2 ("Old Brass Brains"&#x29

This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland. This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland.

Tide Formula Component Cranks on Tide Predicting Machine No. 2

Tide formula component cranks on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The mechanical arrangement (a slotted crank yoke) converts circular motion to a sinusoidal motion. The operator adjusts the position of the pin on each crank to represent the tide formula at a specific port before starting computations. The pin position affects the amplitude and phase of the sinusoid. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

High tide at Whitby

Rough waters splash on rocks at Whitby, North Yorkshire. Rough waters splash on rocks at Whitby, North Yorkshire.

Summation Chain Close-Up

A part of the summation chain of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. By wrapping above and below a series of pulleys, the chain sums their deflections, which is a key component of computing tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. A part of the summation chain of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. By wrapping above and below a series of pulleys, the chain sums their deflections, which is a key component of computing tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Mountain and sea

High tide sea with mountain. High tide sea with mountain

Torii at high tide

Beautiful Torii in Miyajima at high tide with deers in foreground. Beautiful Torii in Miyajima at high tide with deers in foreground

Two Sections of Tide Predicting Machine No. 2

Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Young green mango trees under water in a tropical sea at high tide

Sea Rocks Surrounded by Body of Water High-saturated Photography

Sea Rocks Surrounded by Body of Water High-saturated Photography

Torii at high tide

Beautiful Torii in Miyajima at high tide with mountains in background. Beautiful Torii in Miyajima at high tide with mountains in background

Stormy high tide at the north sea cost. Stormy high tide at the north sea cost

River Ness at high tide

River Ness at high tide

Saint Malo beach and Castle west of France

Saint Malo beach and castle in the mid tide time, west cost of France. Saint Malo beach and castle in the mid tide time, west cost of France

NOAA's Tide Predicting Machine No. 2

This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanographic and Atmospheric Administration (NOAA) maintains the machine in working order. This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanographic and Atmospheric Administration (NOAA) maintains the machine in working order.

high tide at the coast line of the South Atlantic

high tide at the coast line of the South Atlantic

Gears on Tide Predicting Machine No. 2

Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Waves of water of the river and the sea meet each other during high tide and low tide

Abstract background. Waves of water of the river and the sea meet each other during high tide and low tide. Whirlpools of the maelstrom of Saltstraumen, Nordland, Norway

Mechanically Adding Trigonometric Functions

These components perform key computations for Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The tide prediction formula implemented by the machine includes the addition of a series of cosine terms. The triangular metal pieces are part of slotted yoke cranks which convert circular motion to a vertical motion that traces a sinusoid. Each slotted yoke crank is connected by a shaft to a pulley, which causes the pulley to follow the sinusoidal motion. A chain going over and under pulleys sums each of their deflections to compute the tide. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. These components perform key computations for Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The tide prediction formula implemented by the machine includes the addition of a series of cosine terms. The triangular metal pieces are part of slotted yoke cranks which convert circular motion to a vertical motion that traces a sinusoid. Each slotted yoke crank is connected by a shaft to a pulley, which causes the pulley to follow the sinusoidal motion. A chain going over and under pulleys sums each of their deflections to compute the tide. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Hunting Island at High Tide

The rocks with high tide in the morning

The rocks with high tide in the morning

Maine while tide is out

A beautiful landscape in Maine shows the piers and buildings set up high while the tide is out and the markings from water level when it comes in again. . A beautiful landscape in Maine shows the piers and buildings set up high while the tide is out and the markings from water level when it comes in again. .

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

A Tide Formula Component Crank on Tide Predicting Machine No. 2

A tide forumula component crank on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The mechanical arrangement (a slotted crank yoke) converts circular motion to a vertical motion that traces a sinusoid. The operator adjusts the position of the pin on the crank to represent a component of the tide formula at a specific coastal port before starting computations. The pin position affects the amplitude and phase of the sinusoid. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. A tide forumula component crank on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The mechanical arrangement (a slotted crank yoke) converts circular motion to a vertical motion that traces a sinusoid. The operator adjusts the position of the pin on the crank to represent a component of the tide formula at a specific coastal port before starting computations. The pin position affects the amplitude and phase of the sinusoid. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

One active angler fishing in the Indian Ocean during high tide at Botany Bay, NSW, Australia

Low tide at Mont St Michel

View of Mont Saint Michel at low tide. View of Mont Saint Michel at low tide

Sunlight reflecting off wet sand and water

Looking across Morecambe Bay from Arnside Knott, Lancashire, UK to sunlight reflecting off the wet sand and water soon after high tide on a sunny November day. Looking across Morecambe Bay from Arnside Knott, Lancashire, UK to sunlight reflecting off the wet sand and water soon after high tide on a sunny November day.

Mont saint michel - high tide

Mont Saint Michel from the top, high tide arriving. Mont Saint Michel from the top, high tide arriving.

Tenby high tide

Tenby high tide

A boat stranded on the sands of the Waddenzee by the outgoing tide. A boat stranded on the sands of the Waddenzee by the outgoing tide.

High and low tides. water â€‹â€‹level

High and low tides. water â€‹â€‹level

Macmasters beach pool at high tide

Macmasters beach pool at high tide

Sailing boats in Morston creek at high tide. Sailing boats in Morston creek at high tide.

Natural Bridge Landmark Beach High Tide Bushes

Natural Bridge Landmark Beach High Tide Bushes

Floating torii gate

Red floating torii gate outside Itsukushima Shrine at Miyajima at high tide (one of the three most photographed places in Japan)

High tide surf waves at Trevaunance Cove.

High tide surf waves at Trevaunance Cove.

High tide on the river in Galway.

High tide on the river in Galway.

High tide on the river in Galway.

High tide on the river in Galway.

Swimming Pool connceted to the ocean at high tide. Swimming Pool connceted to the ocean at high tide

HIgh tides. Waves on the sea. Isolated icon on black and white background. Weather vector illustration

A couple of Black Egrets with rising tide

As the tide at Sabaki river delta in Kenya rises, two Black Egrets maintain their place in the hope of catching some crustaceans. As the tide at Sabaki river delta in Kenya rises, two Black Egrets maintain their place in the hope of catching some crustaceans.

Dials on Tide Predicting Machine No. 2

Dials for tide height (outer ring), date, and time on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was in operation, the operator recorded the height and time of high and low tides, which were later reproduced in printed tide tables. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. Dials for tide height (outer ring), date, and time on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was in operation, the operator recorded the height and time of high and low tides, which were later reproduced in printed tide tables. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Saint Malo Castle in the mid tide, France

Saint Malo castle in the mid tide time, west cost of France. Saint Malo castle in the mid tide time, west cost of France

High Tide at a

Summation Chain

The summation chain runs around pulleys on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The pulleys move up and down and the chain sums their displacements to compute the height or time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

A sailing boat left high and dry waiting for the tide to come back in. Queensland, Australia. A sailing boat left high and dry waiting for the tide to come back in. Queensland, Australia.

Tide Predicting Machine No. 2 ("Old Brass Brains"&#x29

Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was routinely used, the operator would sit at the desk and turn the crank on the left, which powered the machine. Mechanical components, partially visible on the left, computed the height of tides. These were displayed on the paper tide curve visible at the top right and on the dial below the paper. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland. Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was routinely used, the operator would sit at the desk and turn the crank on the left, which powered the machine. Mechanical components, partially visible on the left, computed the height of tides. These were displayed on the paper tide curve visible at the top right and on the dial below the paper. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland.

High Tide Around Maine Island Lighthouse

High Tide Around Maine Island Lighthouse

Face of Tide Predicting Machine No. 2

The output face of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The pen at the top draws the tide height as the paper moves beneath it. The dials below display the predicted tide height and the corresponding date and time. When the machine was in operation, the operator recorded the height and time of high and low tides, which were later reproduced in printed tide tables. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Hopewell Rocks at high tide

Hopewell Rocks at high tide

Boats at Portsmouth, VA weather high tide and holiday decoration

Boats at Portsmouth, VA weather high tide and holiday decoration

Looking into the Top of Tide Predicting Machine No. 2

These components perform key computations for Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The tide prediction formula implemented by the machine includes the addition of a series of cosine terms. The triangular metal pieces are part of slotted yoke cranks which convert circular motion to a vertical motion that traces a sinusoid. Each slotted yoke crank is connected by a shaft to a pulley, which causes the pulley to follow the sinusoidal motion. A chain going over and under pulleys sums each of their deflections to compute the tide. Along the top of the photo, connecting shafts drive slotted yoke cranks on both sides of the machine. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland. These components perform key computations for Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The tide prediction formula implemented by the machine includes the addition of a series of cosine terms. The triangular metal pieces are part of slotted yoke cranks which convert circular motion to a vertical motion that traces a sinusoid. Each slotted yoke crank is connected by a shaft to a pulley, which causes the pulley to follow the sinusoidal motion. A chain going over and under pulleys sums each of their deflections to compute the tide. Along the top of the photo, connecting shafts drive slotted yoke cranks on both sides of the machine. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland.

Ocean Tides

Bridge at Ardmore bay

Bridge at Ardmore bay during high tide, county Galway, Ireland.

- Home
- Search for High tide free images