Low Tide Free Stock Images

Include:

Sponsored images by Dreamstime

Small boat at low tide

Small boat at low tide

Low tide boats of ocean

Low tide boats of ocean

High and low tides. water â€‹â€‹level

High and low tides. water â€‹â€‹level

Sand at low tide

Sand at low tide

Marine life at low tide

Marine life at low tide

Searching for shells at low tide

Searching for shells at low tide

Low tide in fog

Low tide in fog

Low tide

Low Tide Panoramic

Low Tide Panoramic

Low Tide

St Ives harbour at low Tide

St Ives harbour at low Tide

River Estuary, Low Tide

River Estuary, Low Tide

Low tide

Low Tide

La Jolla at Low Tide

La Jolla at Low Tide

Face of Tide Predicting Machine No. 2

The output face of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The pen at the top draws the tide height as the paper moves beneath it. The dials below display the predicted tide height and the corresponding date and time. When the machine was in operation, the operator recorded the height and time of high and low tides, which were later reproduced in printed tide tables. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Dials on Tide Predicting Machine No. 2

Dials for tide height (outer ring), date, and time on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was in operation, the operator recorded the height and time of high and low tides, which were later reproduced in printed tide tables. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. Dials for tide height (outer ring), date, and time on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was in operation, the operator recorded the height and time of high and low tides, which were later reproduced in printed tide tables. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Low tide at Silverdale

Sand at low tide in the Morcambe Bay estuary at low tide. Sand at low tide in the Morcambe Bay estuary at low tide

Low tide at Silverdale

Sand at low tide in the Morcambe Bay estuary at low tide. Sand at low tide in the Morcambe Bay estuary at low tide

Low tide at Silverdale

Sand at low tide in the Morcambe Bay estuary at low tide. Sand at low tide in the Morcambe Bay estuary at low tide

Low tide at Silverdale

Sand at low tide in the Morcambe Bay estuary at low tide. Sand at low tide in the Morcambe Bay estuary at low tide

Tide Predicting Machine No. 2 ("Old Brass Brains"&#x29

This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland. This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland.

A Tide Formula Component Crank on Tide Predicting Machine No. 2

A tide forumula component crank on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The mechanical arrangement (a slotted crank yoke) converts circular motion to a vertical motion that traces a sinusoid. The operator adjusts the position of the pin on the crank to represent a component of the tide formula at a specific coastal port before starting computations. The pin position affects the amplitude and phase of the sinusoid. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. A tide forumula component crank on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The mechanical arrangement (a slotted crank yoke) converts circular motion to a vertical motion that traces a sinusoid. The operator adjusts the position of the pin on the crank to represent a component of the tide formula at a specific coastal port before starting computations. The pin position affects the amplitude and phase of the sinusoid. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to produce its tide predictions. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Tide Formula Component Cranks on Tide Predicting Machine No. 2

Tide formula component cranks on Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The mechanical arrangement (a slotted crank yoke) converts circular motion to a sinusoidal motion. The operator adjusts the position of the pin on each crank to represent the tide formula at a specific port before starting computations. The pin position affects the amplitude and phase of the sinusoid. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank.

Looking into the Top of Tide Predicting Machine No. 2

These components perform key computations for Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The tide prediction formula implemented by the machine includes the addition of a series of cosine terms. The triangular metal pieces are part of slotted yoke cranks which convert circular motion to a vertical motion that traces a sinusoid. Each slotted yoke crank is connected by a shaft to a pulley, which causes the pulley to follow the sinusoidal motion. A chain going over and under pulleys sums each of their deflections to compute the tide. Along the top of the photo, connecting shafts drive slotted yoke cranks on both sides of the machine. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland. These components perform key computations for Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The tide prediction formula implemented by the machine includes the addition of a series of cosine terms. The triangular metal pieces are part of slotted yoke cranks which convert circular motion to a vertical motion that traces a sinusoid. Each slotted yoke crank is connected by a shaft to a pulley, which causes the pulley to follow the sinusoidal motion. A chain going over and under pulleys sums each of their deflections to compute the tide. Along the top of the photo, connecting shafts drive slotted yoke cranks on both sides of the machine. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland.

NOAA's Tide Predicting Machine No. 2

This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanographic and Atmospheric Administration (NOAA) maintains the machine in working order. This photo shows the largest of the three sections of Tide Predicting Machine No. 2, a special purpose mechanical analog computer for predicting the height and time of high and low tides. The gears on the left transmit power from the hand crank. The components on the right contribute to the computation of the time of high and low tides. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanographic and Atmospheric Administration (NOAA) maintains the machine in working order.

Low tide beach - Atlantic coast, Cornwall, UK

This picture was taken during a low tide in Newquay, UK. Yet another wide and low wave was approaching my feet. Hope you can feel it. *** If you need more variations on this theme, feel free to contact me (leave a comment via Tools tab). ***. This picture was taken during a low tide in Newquay, UK. Yet another wide and low wave was approaching my feet. Hope you can feel it. *** If you need more variations on this theme, feel free to contact me (leave a comment via Tools tab). ***

Waves of water of the river and the sea meet each other during high tide and low tide

Abstract background. Waves of water of the river and the sea meet each other during high tide and low tide. Whirlpools of the maelstrom of Saltstraumen, Nordland, Norway

Tide Predicting Machine No. 2 ("Old Brass Brains"&#x29

Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was routinely used, the operator would sit at the desk and turn the crank on the left, which powered the machine. Mechanical components, partially visible on the left, computed the height of tides. These were displayed on the paper tide curve visible at the top right and on the dial below the paper. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland. Tide Predicting Machine No. 2 is a special purpose mechanical analog computer for predicting the height and time of high and low tides. When the machine was routinely used, the operator would sit at the desk and turn the crank on the left, which powered the machine. Mechanical components, partially visible on the left, computed the height of tides. These were displayed on the paper tide curve visible at the top right and on the dial below the paper. The U.S. government used Tide Predicting Machine No. 2 from 1910 to 1965 to predict tides for ports around the world. The machine, also known as “Old Brass Brains,” uses an intricate arrangement of gears, pulleys, chains, slides, and other mechanical components to perform the computations. A person using the machine would require 2-3 days to compute a year’s tides at one location. A person performing the same calculations by hand would require hundreds of days to perform the work. The machine is 10.8 feet (3.3 m) long, 6.2 feet (1.9 m) high, and 2.0 feet (0.61 m) wide and weighs approximately 2,500 pounds (1134 kg). The operator powers the machine with a hand crank. The National Oceanic and Atmospheric Administration (NOAA) occasionally displays the machine at its facility in Silver Spring, Maryland.

Bright fishing boat in the roadstead in the morning at low tide

Bright fishing boat in the roadstead in the morning at low tide with rocks

Rocks on a sand in the water on low tide in Brandon beach

Rocks on a sand in the water on low tide in Brandon beach in the evening. Ireland

Low tide on Port Royal Sound taken from Hilton Head Plantation from what is known as Ghost Beach.

Low Tide At The Inlet, Acadia National Park, Maine

View of tropical sandy beach during low tide. View of tropical sandy beach during low tide

Beach at low tide

Beach at low tide on sunny day

Estuary at low tide

Exmouth Estuary, Devon, at low tide. Exmouth Estuary, Devon, at low tide

Cape Tribulation beach in North Australia at low tide

Muddy seascape during low tide. Muddy seascape during low tide

Low tide in southern portugal

Rocky wall at low tide.

Rocky wall with cloudy blue sky at low tide. Rocky wall with cloudy blue sky at low tide.

Landscape view off the West Coast Trail on the Vancouver Island at Low Tide

The seabed at low tide

Flat view on textured seabed at low tide. Flat view on textured seabed at low tide

Low tide on the beach

Natural detail soil in the low tide

Rock and sand at low tide - Cape Lookout State Park

North California coast - low tide

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Low tide in the north sea

Low tide at Brookings, Oregon. Low tide at Brookings, Oregon

Low tide at sea

Low tide at sea during sunrise

Rock and sand at low tide - Cape Lookout State Park

Low tide on the Channel

Low tide at Aukai Beach Park Eastcoast Oahu, Hawaii

Rocky beach in low-tide on a stromy day. Rocky beach in low-tide on a stromy day.

Boats at low tide

Boats in a scottish harbor at low tide. Boats in a scottish harbor at low tide

Low tide in the river

Low tide in the river, with motifs related to fishing activities, at the sunset

Low tide in the bay of Cadiz

Boats lie on the rocks on low tide in the bay of Cadiz

Boat at low tide

Boat at shore in the sun at low tide. Boat at shore in the sun at low tide

Bridge at low tide

The long bridge of ile de re,france,connecting the island with the continent,at low tide,fall 2008. The long bridge of ile de re,france,connecting the island with the continent,at low tide,fall 2008.

A breton beach during the low tide

Low Tide Sunset

Exposed rock pools on the east cost of Lord Howe Is. Sunset over beach at low tide. Exposed rock pools on the east cost of Lord Howe Is. Sunset over beach at low tide

- Home
- Search for Low tide free images